Qanysh Satpaev
Eńbek etpeseń, jıǵan bilimiń kádege jaramaı jatqan mıneral sekildi. Onyń ishin arshyp, asyl kenin jarqyratý úshin eńbek kerek, qol men oı qımyly qajet.
Home/Blog
Compressor equipment blog
We write about what we deal with on site: how to read the condition of a unit, when an overhaul is due, what to check in spare parts documentation. Based on our own practice of servicing compressors at industrial plants across Kazakhstan.
Diagnostics
7 signs that a compressor unit needs a major overhaul
Vibration, loss of capacity, metal in the oil — which symptoms mean wear and which are fixed by adjustment.
Read →
Maintenance
Compressor maintenance by running hours: from level 1 to level 4
What each level covers, at what interval it is due, and why skipping level 2 costs more than the downtime it saves.
Read →
Spare parts
Genuine parts and aftermarket: how to verify authenticity
Which documents a supplier must provide, what batch traceability means and how a counterfeit shows itself before installation.
Read →
Equipment
Types of compressors: screw, reciprocating and centrifugal
Positive-displacement vs dynamic — and how the type of machine sets the wear pattern and the repair logic.
Read →
Diagnostics
Compressor vibration diagnostics: how to read the spectrum
What to measure, how to read 1× and 2× peaks, and when a rising trend means it is time to stop the machine.
Read →
Need advice on your equipment?
Describe the unit model and the problem — a QANSAT ENERGY engineer will get back to you and advise whether an on-site inspection is required.
Ask an engineer
Leave Your Contacts
and We Will Get Back to You
and We Will Get Back to You
info@qansat.com
+7 (777) 400-27-71
+7 (7122) 50-69-88
© 2026 | ТОО «QANSAT ENERGY»